Valley metal
All flashing is replaced, not reused for a watertight finish.
A roofer in Denville can replace a worn-out cedar shake roof by tearing off the old shakes and felt down to the sheathing, repairing or adding decking and installing a new roof, whether that is new cedar or a different material. One call to (862) 421-0116 reaches a nearby cedar roof replacement pro.
Every cedar roof eventually wears past what spot repairs can fix. After decades of weather, shakes lose thickness, split easily and no longer hold a nail, so new pieces have nothing solid to tie into. At that point a full replacement protects the sheathing and framing underneath.
Overlaying cedar shakes with new roofing is not a real option. Shakes are uneven and hold moisture, so anything laid on top sits on a lumpy, damp base, and most codes do not allow roofing over wood shakes. Removing everything is the only way to inspect the deck.
Most cedar roofs sit on spaced sheathing, and that affects every option. Spaced 1x boards suit cedar, but other roofing needs solid plywood or OSB, either laid over the boards or installed after they come out. Rotted boards are replaced either way.
Cedar Shake Roof Replacement is often paired with cedar shake roof installation and cedar shake roof repair, depending on the cause.
Looking for Denville cedar shake roof replacement? Call (862) 421-0116 to reach a nearby roofing contractor.
Call nowA cedar replacement is a bigger tear-off than most roofs.
Before any tear-off, you decide what goes back on, since that choice decides whether the deck needs solid sheathing. Permits are pulled and any neighborhood or fire rules are checked.
Gutters, shrubs and patios are covered before the old roof comes off. Spaced sheathing lets debris fall into the attic, so cover anything stored there.
The old shakes and felt are stripped section by section so the roof is never left open longer than needed. If an old asphalt layer was ever laid over the cedar, it comes off too.
The roofer replaces soft boards and adds solid sheathing where the new material requires it. A sound deck is what the new fasteners rely on.
Waterproof membrane at the eaves and valleys plus new underlayment protect the house before the finish roof goes on. For new cedar, a breathable mat or spaced boards keep air moving under the shakes.
The new roof goes on with new valley metal, step flashing, pipe boots and ridge ventilation. The site is cleaned and swept with magnets before the crew leaves.
All flashing is replaced, not reused for a watertight finish.
Debris is removed daily so the yard is safe to walk.
Damaged sheathing is renewed for the new roofing material.
All shakes, felt and old metal are stripped with debris hauled away.
New underlayment and eave membrane protect the deck before the finish roof goes on.
Cedar shingle roof replacement is common on older homes, where sawn shingles were the standard roof long before asphalt. It is common to find original shingles hidden under a later asphalt roof, both of which come off. Once the deck is bare, the roofer decides whether the boards can carry new shingles or need solid sheathing.
New cedar shingles restore the tailored, historic appearance many owners want to keep. If your home is in a historic area, check what materials are allowed. A roofer in Denville can help you weigh the look, the upkeep and the rules before you decide.
Many cedar roofs being replaced in Denville are the original wood on homes several decades old. Across Denville and nearby towns like Rockaway, Mountain Lakes, Morris Plains and Dover, some owners put cedar back to keep the look while others switch to synthetic shakes, architectural shingles or metal, which is worth talking through before any work begins.
Searching for cedar shake roof replacement near me from Denville or Rockaway, Mountain Lakes, Morris Plains and Dover? Call (862) 421-0116 to talk to a roofer who works in your part of town.
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Denville, NJ have the roof checked in the fall and again after the snow melts.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Local roofers see the same roofs and storm damage across Denville and nearby towns.
Ask the roofer about the cause, the options and the estimate before work starts.
More questions? Call (862) 421-0116
Cedar roof installation from the sheathing and starter course up to the ridge, with every layer chosen before the first shake goes on.
Learn moreRepairs for split shakes, rot at the butts, moss buildup and leaking valleys on wood roofs, without tearing off the shakes that still have years left.
Learn moreReplacing an aging roof with new underlayment, flashing, vents and roofing, built to current code from the decking out.
Learn moreFull shingle roof replacement, from tear-off and deck repair to new shingles and flashing, so the new roof starts on a sound, dry deck.
Learn moreLooking for something else?
See all roofing servicesCall (862) 421-0116 to talk to a roofer serving Denville, NJ.